There are many types of water heating systems, but they all tend to develop the same defects. Here are three of the most common water heater problems you may encounter in Virginia Beach, VA.
1. You Spot Leaks Around the Water Heater
If you spot water leaks around your water heater, it could be anything from condensation to a defective tank. You can lower the thermostat and turn off the heater for a few hours to rule out condensation. Check the drain valve and the pressure relief valve.
If closing the valve doesn’t stop the leaking, you may need to replace the faulty components. The issue could also be with the tank. If the tank is leaking, you will need a replacement.
2. The Water Isn’t Hot Enough
If your heater produces only warm, not hot water, it could be an issue with sizing. Your equipment may be too small to meet the demands of your household. One solution is to limit the number of showerheads or faucets running simultaneously.
If you’re sure the heater is not undersized, the issue could be your equipment’s heating element. For gas burners, you may need to replace the thermocouple. Consult a water heater service in Virginia Beach to avoid hazards when fixing your equipment. Replacing parts should be completed by a trained technician.
3. Foul Odor or Rusty Water
Your water heating system may produce foul-smelling or discolored water due to mineral buildup. Even though the hard water levels in Virginia Beach are relatively low, a defective anode rod can cause scale accumulation.
The solution is usually to replace the anode rod. To prevent mineral buildup, you need to flush out the water heater at least twice a year.
You can fix some simple issues with your water heater, like tightening the valves or adjusting the thermostat. But when unsure, it is best to leave the task to certified professionals. Contact our team at Climatemakers of VA to schedule quality maintenance services for your equipment.
Image provided by iStock